DRACO-GND-6500

Scalable Power for Tethered Platforms

 

The DRACO-GND-6500 seamlessly integrates a 6.5 kW power supply and our Digital LYNX Ethernet over power technology into a single package. Multiple power supplies can be connected in parallel to support larger systems.

Applications:

  • Tethered UAVs
  • Aerostats
  • Remotely Operated Vehicles
  • Submersibles
  • Telerobotics

 

DRACO-GND-6500 6500 Watt Power Supply

DRACO-GND-6500

Specifications

 

Overview

 
Output Voltage1550 VDC (Adjustable)
Output Current4.25 Amps (Adjustable)
Output Power6500 kW
Efficiency86%
Power Factor0.95
AC Input180 - 265 VAC Single Phase
Frequency Rage47 to 63 Hz

(Optional) Ethernet Interface

Physical10BASE-T, 100BASE-TX
PortsThree fully switched
OptionsFactory configuration available for VLAN tagging, rate limiting, and port mirroring

(Optional) Data Link

Modulation50 Mbps at 1000 ft. (Typical)
BandOrthogonal frequency-division multiplexing (OFDM)
Ethernet10BASE-T, 100BASE-TX

SWaP

 
Size8.9" x 8.9" x 22"
Weight42 lbs.
Power8000 kW

Indicators

 
PowerGround Power
OutputHigh Voltage Output Enabled
FaultSelf Test Pass / Fail
ShareParallel Operation
RemoteRemote Control

Features

 

 

  • Transmit power and high speed bidirectional data over two conductors
  • Scalable parallel power bus supports multiple units
  • Remote Control and Monitoring via RS232
  • Over Current and Over Voltage Protection with Remote Reset
  • Data rates as high as 50 Mbps
DRACO-GND-6500-Back-512

Efficiency

 

DRACO-GND-6500-Efficiency-vs-Load

Digital LYNX Connectivity

 

The DRACO-GND-6500 is designed to provide seamless data connectivity through the DRACO-XFMR and our compatible line of Digital LYNX products.

LYNX-25-CLEAR-SMALL

 

DRACO-XFMR-WEB-480

LYNX-OEM-3P

DRACO-XFMR

LYNX-OEM-3P
Weighing only 50 grams, the LYNX-OEM-3P seamlessly integrates our Digital LYNX Ethernet over power technology and a three port Ethernet switch into a single package. LYNX is the robust connectivity solution for tethered aerostats, UAS, and submersibles. Simplify connectivity to payloads and autopilots by adding RS232 and/or H.264 video encoding through the on board expansion ports. LYNX eliminates the expense and hassle associated with fragile fiber optic tethers.

DRACO-XFMR
Fly more payload at a higher altitude with a vehicle-side, high-voltage DC-to-DC converter for tethered platforms. Our DRACO technology allows designers to use longer and lighter tethers than would be possible with traditional converters. With an industry leading energy density of 6.9 Watts per gram, you can focus on your mission, not your power budget. Multiple DRACO-XFMRs can be connected in parallel to provide scalable power for even the most demanding applications.

Documents