LYNX-UART-XB RS232 Module

RS232 Connectivity for Tethered Platforms

 

The LYNX-UART-XB is an expansion board for the LYNX-OEM-3P that adds support for two channels of RS232. Seamlessly interface with remote RS232 hardware with a physical device or virtual serial drivers. Remote serial ports can be accessed through TCP, UDP, Telnet or serial port drivers. Alternatively, through port binding, two LYNX-UART-XBs may be used to form a seamless point to point RS232 connection that is completely transparent to hardware and software.

Applications:

  • Aerostats
  • Tethered UAVs
  • Micro Gimbals
  • Auto Pilots
  • Remotely Operated Vehicles
  • Submersibles
  • Telerobotics
  • Pipe Inspection

 

 

 

 


LYNX-OEM

Specifications

 

Serial Interface

InterfaceCMOS (Asynchronous) 3.3V-level signals (5V tolerant)
and RS-232 voltage level outputs
Data Rates300bps to 921,600bps (software selectable)
Data Bits7 or 8
Stop Bits1 or 2
ParityOdd, Even, None
Flow ControlXON/XOFF (software)

Network

ProtocolsTCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP,
BOOTP, TFTP, AutoIP, and HTTP
ManagementTelnet, Serial, Internal Web Server, and Microsoft
Windows based utility for web configuration
Security256-bit AES Encryption

SWAP

Size3 x 2.5 x 0.35 inches
Weight25 grams
Power860 mW @ 3.3 VDC

Architecture

CPUBased on the DSTni-EX Enhanced 16-bit x86 Architecture
Memory256KB SRAM, 512KB Flash
FirmwareUpgradeable via TFTP and Serial Port
Storage384KB for Web Pages

Data Connector

Data Connector Pinout

PinSignalDescriptionPinSignalDescription
1TX1RS232 Transmit Port 1 [Output]6CTX2CMOS Transmit Port 2 [Output]
2RX1RS232 Receive Port 1 [Input]7CRX1CMOS Receive Port 1 [Input]
3RX2RS232 Receive Port 2 [Input]8CRX2CMOS Receive Port 2 [Input]
4TX2RS232 Transmit Port 2 [Output]9GNDGround
5CTX1CMOS Transmit Port 1 [Output]10GNDGround

LYNX-UART-XB_Data_Connector

LYNX-UART-XB_Mating_Connector

DIP Switch – RS232 Receive Configuration

Header

DIPSignalONOFF
1Port 2 RXRS232CMOS
2Port 1 RXRS232CMOS

Accessories

 

The LYNX-UART-XB is an expansion board that adds support for two channels of RS232

  • Interface 3.3V-level signals (5V tolerant) or RS-232 voltage levels
  • Data Rates: 300bps to 921,600bps (software selectable)
  • Port Binding or Virtual Serial Drivers

 

The LYNX-H264-XB is adds support for onboard low latency video encoding and a RS232

  • Input Analog Video NTSC
  • H.264 / M-JPEG (Optional Video Enhancement and Stabilization)
  • Interface 3.3V-level signals or RS-232 voltage levels
  • Port Binding or Virtual Serial Drivers

 

 

Documents