Scalable Power for Tethered Drones
The DRACO-GND-6500 seamlessly integrates a 6.5 kW power supply and our Digital LYNX Ethernet over power technology into a single package. Multiple power supplies can be connected in parallel to support larger systems.
Applications:
- Tethered UAVs
- Aerostats
- Remotely Operated Vehicles
- Submersibles
- Telerobotics
DRACO-GND-6500
Specifications
Overview | |
---|---|
Output Voltage | 1550 VDC (Adjustable) |
Output Current | 4.25 Amps (Adjustable) |
Output Power | 6500 kW |
Efficiency | 86% |
Power Factor | 0.95 |
AC Input | 180 - 265 VAC Single Phase |
Frequency Rage | 47 to 63 Hz |
(Optional) Ethernet Interface |
|
---|---|
Physical | 10BASE-T, 100BASE-TX |
Ports | Three fully switched |
Options | Factory configuration available for VLAN tagging, rate limiting, and port mirroring |
(Optional) Data Link |
|
---|---|
Modulation | 50 Mbps at 1000 ft. (Typical) |
Band | Orthogonal frequency-division multiplexing (OFDM) |
Ethernet | 10BASE-T, 100BASE-TX |
SWaP | |
---|---|
Size | 8.9" x 8.9" x 22" |
Weight | 42 lbs. |
Power | 8000 kW |
Indicators | |
---|---|
Power | Ground Power |
Output | High Voltage Output Enabled |
Fault | Self Test Pass / Fail |
Share | Parallel Operation |
Remote | Remote Control |
Features
- Transmit power and high speed bidirectional data over two conductors
- Scalable parallel power bus supports multiple units
- Remote Control and Monitoring via RS232
- Over Current and Over Voltage Protection with Remote Reset
- Data rates as high as 50 Mbps
Efficiency
Digital LYNX Connectivity
The DRACO-GND-6500 is designed to provide seamless data connectivity through the DRACO-XFMR and our compatible line of Digital LYNX products.
LYNX-OEM-3P
DRACO-XFMR
[panel panel_heading=”LYNX-OEM-3P” panel_text=”Weighing only 50 grams, the LYNX-OEM-3P seamlessly integrates our Digital LYNX Ethernet over power technology and a three port Ethernet switch into a single package. LYNX is the robust connectivity solution for tethered aerostats, UAS, and submersibles. Simplify connectivity to payloads and autopilots by adding RS232 and/or H.264 video encoding through the on board expansion ports. LYNX eliminates the expense and hassle associated with fragile fiber optic tethers.” panel_color=”panel-default”/]
[panel panel_heading=”DRACO-XFMR” panel_text=”Fly more payload at a higher altitude with a vehicle-side, high-voltage DC-to-DC converter for tethered platforms. Our DRACO technology allows designers to use longer and lighter tethers than would be possible with traditional converters. With an industry leading energy density of 6.9 Watts per gram, you can focus on your mission, not your power budget. Multiple DRACO-XFMRs can be connected in parallel to provide scalable power for even the most demanding applications.” panel_color=”panel-default”/]